Acura RDX Roof Rack Installation And Review Videos

Whispbar Flush Bar Roof Rack Installation - 2008 Acura RDX- Video

Today on our 2008 Acura RDX were going to be test fitting a Whispbar roof rack system by Yakima. Well be using the S26 flush bars, part number WB-S26 as well as the fit kit for the RDX, part number WB-K490. We already have our roof rack assembled according to the instructions, so now were ready to mount the bars up on the roof. The first thing we need to do is open the passenger and drivers side front doors. Well set our front cross bar up into place and well check the measurements in our instructions to position it properly. We need to measure seven and seven-eighths inches forward from the seam between the two doors to the center line of our front crossbar. more

1/17/2013 1:03:22 PM

Whispbar Through Bar Roof Rack Installation - 2008 Acura RDX- Video

Today were working with a 2008 Acura RDX and well be test fitting the Whispbar roof rack system. Well be using through bars, part number WB-S17 as well as the fit kit for our vehicle, part number BW-K490. We already have our crossbars assembled according to the instructions, so now were ready to fit them up on our vehicle. First well open the driver and passengers side front doors and well place our front crossbar assembly up on top of the roof. To position the front bar we need to measure seven and seven-eighths inches from the seam at the doors forward to the center of the crossbar. Once we have this set on boths ides of the vehicle we can go ahead and tighten our locking screws to secure the clamps to our vehicle. more

1/17/2013 1:03:19 PM